class Concurrent::TimerTask

A very common concurrency pattern is to run a thread that performs a task at regular intervals. The thread that performs the task sleeps for the given interval then wakes up and performs the task. Lather, rinse, repeat… This pattern causes two problems. First, it is difficult to test the business logic of the task because the task itself is tightly coupled with the concurrency logic. Second, an exception raised while performing the task can cause the entire thread to abend. In a long-running application where the task thread is intended to run for days/weeks/years a crashed task thread can pose a significant problem. ‘TimerTask` alleviates both problems.

When a ‘TimerTask` is launched it starts a thread for monitoring the execution interval. The `TimerTask` thread does not perform the task, however. Instead, the TimerTask launches the task on a separate thread. Should the task experience an unrecoverable crash only the task thread will crash. This makes the `TimerTask` very fault tolerant. Additionally, the `TimerTask` thread can respond to the success or failure of the task, performing logging or ancillary operations.

One other advantage of ‘TimerTask` is that it forces the business logic to be completely decoupled from the concurrency logic. The business logic can be tested separately then passed to the `TimerTask` for scheduling and running.

A ‘TimerTask` supports two different types of interval calculations. A fixed delay will always wait the same amount of time between the completion of one task and the start of the next. A fixed rate will attempt to maintain a constant rate of execution regardless of the duration of the task. For example, if a fixed rate task is scheduled to run every 60 seconds but the task itself takes 10 seconds to complete, the next task will be scheduled to run 50 seconds after the start of the previous task. If the task takes 70 seconds to complete, the next task will be start immediately after the previous task completes. Tasks will not be executed concurrently.

In some cases it may be necessary for a ‘TimerTask` to affect its own execution cycle. To facilitate this, a reference to the TimerTask instance is passed as an argument to the provided block every time the task is executed.

The ‘TimerTask` class includes the `Dereferenceable` mixin module so the result of the last execution is always available via the `#value` method. Dereferencing options can be passed to the `TimerTask` during construction or at any later time using the `#set_deref_options` method.

‘TimerTask` supports notification through the Ruby standard library {ruby-doc.org/stdlib-2.0/libdoc/observer/rdoc/Observable.html Observable} module. On execution the `TimerTask` will notify the observers with three arguments: time of execution, the result of the block (or nil on failure), and any raised exceptions (or nil on success).

@!macro copy_options

@example Basic usage

task = Concurrent::TimerTask.new{ puts 'Boom!' }
task.execute

task.execution_interval #=> 60 (default)

# wait 60 seconds...
#=> 'Boom!'

task.shutdown #=> true

@example Configuring ‘:execution_interval`

task = Concurrent::TimerTask.new(execution_interval: 5) do
       puts 'Boom!'
     end

task.execution_interval #=> 5

@example Immediate execution with ‘:run_now`

task = Concurrent::TimerTask.new(run_now: true){ puts 'Boom!' }
task.execute

#=> 'Boom!'

@example Configuring ‘:interval_type` with either :fixed_delay or :fixed_rate, default is :fixed_delay

task = Concurrent::TimerTask.new(execution_interval: 5, interval_type: :fixed_rate) do
       puts 'Boom!'
     end
task.interval_type #=> :fixed_rate

@example Last ‘#value` and `Dereferenceable` mixin

task = Concurrent::TimerTask.new(
  dup_on_deref: true,
  execution_interval: 5
){ Time.now }

task.execute
Time.now   #=> 2013-11-07 18:06:50 -0500
sleep(10)
task.value #=> 2013-11-07 18:06:55 -0500

@example Controlling execution from within the block

timer_task = Concurrent::TimerTask.new(execution_interval: 1) do |task|
  task.execution_interval.to_i.times{ print 'Boom! ' }
  print "\n"
  task.execution_interval += 1
  if task.execution_interval > 5
    puts 'Stopping...'
    task.shutdown
  end
end

timer_task.execute
#=> Boom!
#=> Boom! Boom!
#=> Boom! Boom! Boom!
#=> Boom! Boom! Boom! Boom!
#=> Boom! Boom! Boom! Boom! Boom!
#=> Stopping...

@example Observation

class TaskObserver
  def update(time, result, ex)
    if result
      print "(#{time}) Execution successfully returned #{result}\n"
    else
      print "(#{time}) Execution failed with error #{ex}\n"
    end
  end
end

task = Concurrent::TimerTask.new(execution_interval: 1){ 42 }
task.add_observer(TaskObserver.new)
task.execute
sleep 4

#=> (2013-10-13 19:08:58 -0400) Execution successfully returned 42
#=> (2013-10-13 19:08:59 -0400) Execution successfully returned 42
#=> (2013-10-13 19:09:00 -0400) Execution successfully returned 42
task.shutdown

task = Concurrent::TimerTask.new(execution_interval: 1){ sleep }
task.add_observer(TaskObserver.new)
task.execute

#=> (2013-10-13 19:07:25 -0400) Execution timed out
#=> (2013-10-13 19:07:27 -0400) Execution timed out
#=> (2013-10-13 19:07:29 -0400) Execution timed out
task.shutdown

task = Concurrent::TimerTask.new(execution_interval: 1){ raise StandardError }
task.add_observer(TaskObserver.new)
task.execute

#=> (2013-10-13 19:09:37 -0400) Execution failed with error StandardError
#=> (2013-10-13 19:09:38 -0400) Execution failed with error StandardError
#=> (2013-10-13 19:09:39 -0400) Execution failed with error StandardError
task.shutdown

@see ruby-doc.org/stdlib-2.0/libdoc/observer/rdoc/Observable.html @see docs.oracle.com/javase/7/docs/api/java/util/TimerTask.html

Constants

DEFAULT_INTERVAL_TYPE

Default ‘:interval_type`

EXECUTION_INTERVAL

Default ‘:execution_interval` in seconds.

FIXED_DELAY

Maintain the interval between the end of one execution and the start of the next execution.

FIXED_RATE

Maintain the interval between the start of one execution and the start of the next. If execution time exceeds the interval, the next execution will start immediately after the previous execution finishes. Executions will not run concurrently.

Attributes

interval_type[R]

@!attribute [r] interval_type @return [Symbol] method to calculate the interval between executions

Public Class Methods

execute(opts = {}, &task) click to toggle source

Create and execute a new ‘TimerTask`.

@!macro timer_task_initialize

@example

task = Concurrent::TimerTask.execute(execution_interval: 10){ print "Hello World\n" }
task.running? #=> true
# File lib/concurrent-ruby/concurrent/timer_task.rb, line 252
def self.execute(opts = {}, &task)
  TimerTask.new(opts, &task).execute
end
new(opts = {}, &task) click to toggle source

Create a new TimerTask with the given task and configuration.

@!macro timer_task_initialize

@param [Hash] opts the options defining task execution.
@option opts [Float] :execution_interval number of seconds between
  task executions (default: EXECUTION_INTERVAL)
@option opts [Boolean] :run_now Whether to run the task immediately
  upon instantiation or to wait until the first #  execution_interval
  has passed (default: false)
@options opts [Symbol] :interval_type method to calculate the interval
  between executions, can be either :fixed_rate or :fixed_delay.
  (default: :fixed_delay)
@option opts [Executor] executor, default is `global_io_executor`

@!macro deref_options

@raise ArgumentError when no block is given.

@yield to the block after :execution_interval seconds have passed since
  the last yield
@yieldparam task a reference to the `TimerTask` instance so that the
  block can control its own lifecycle. Necessary since `self` will
  refer to the execution context of the block rather than the running
  `TimerTask`.

@return [TimerTask] the new `TimerTask`
Calls superclass method Concurrent::RubyExecutorService::new
# File lib/concurrent-ruby/concurrent/timer_task.rb, line 209
def initialize(opts = {}, &task)
  raise ArgumentError.new('no block given') unless block_given?
  super
  set_deref_options opts
end

Public Instance Methods

execute() click to toggle source

Execute a previously created ‘TimerTask`.

@return [TimerTask] a reference to ‘self`

@example Instance and execute in separate steps

task = Concurrent::TimerTask.new(execution_interval: 10){ print "Hello World\n" }
task.running? #=> false
task.execute
task.running? #=> true

@example Instance and execute in one line

task = Concurrent::TimerTask.new(execution_interval: 10){ print "Hello World\n" }.execute
task.running? #=> true
# File lib/concurrent-ruby/concurrent/timer_task.rb, line 235
def execute
  synchronize do
    if @running.false?
      @running.make_true
      schedule_next_task(@run_now ? 0 : @execution_interval)
    end
  end
  self
end
execution_interval() click to toggle source

@!attribute [rw] execution_interval @return [Fixnum] Number of seconds after the task completes before the

task is performed again.
# File lib/concurrent-ruby/concurrent/timer_task.rb, line 259
def execution_interval
  synchronize { @execution_interval }
end
execution_interval=(value) click to toggle source

@!attribute [rw] execution_interval @return [Fixnum] Number of seconds after the task completes before the

task is performed again.
# File lib/concurrent-ruby/concurrent/timer_task.rb, line 266
def execution_interval=(value)
  if (value = value.to_f) <= 0.0
    raise ArgumentError.new('must be greater than zero')
  else
    synchronize { @execution_interval = value }
  end
end
running?() click to toggle source

Is the executor running?

@return [Boolean] ‘true` when running, `false` when shutting down or shutdown

# File lib/concurrent-ruby/concurrent/timer_task.rb, line 218
def running?
  @running.true?
end
timeout_interval() click to toggle source

@!attribute [rw] timeout_interval @return [Fixnum] Number of seconds the task can run before it is

considered to have failed.
# File lib/concurrent-ruby/concurrent/timer_task.rb, line 281
def timeout_interval
  warn 'TimerTask timeouts are now ignored as these were not able to be implemented correctly'
end
timeout_interval=(value) click to toggle source

@!attribute [rw] timeout_interval @return [Fixnum] Number of seconds the task can run before it is

considered to have failed.
# File lib/concurrent-ruby/concurrent/timer_task.rb, line 288
def timeout_interval=(value)
  warn 'TimerTask timeouts are now ignored as these were not able to be implemented correctly'
end

Private Instance Methods

calculate_next_interval(start_time) click to toggle source

@!visibility private

# File lib/concurrent-ruby/concurrent/timer_task.rb, line 352
def calculate_next_interval(start_time)
  if @interval_type == FIXED_RATE
    run_time = Concurrent.monotonic_time - start_time
    [execution_interval - run_time, 0].max
  else # FIXED_DELAY
    execution_interval
  end
end
execute_task(completion) click to toggle source

@!visibility private

# File lib/concurrent-ruby/concurrent/timer_task.rb, line 336
def execute_task(completion)
  return nil unless @running.true?
  start_time = Concurrent.monotonic_time
  _success, value, reason = @task.execute(self)
  if completion.try?
    self.value = value
    schedule_next_task(calculate_next_interval(start_time))
    time = Time.now
    observers.notify_observers do
      [time, self.value, reason]
    end
  end
  nil
end
ns_initialize(opts, &task) click to toggle source
# File lib/concurrent-ruby/concurrent/timer_task.rb, line 296
def ns_initialize(opts, &task)
  set_deref_options(opts)

  self.execution_interval = opts[:execution] || opts[:execution_interval] || EXECUTION_INTERVAL
  if opts[:interval_type] && ![FIXED_DELAY, FIXED_RATE].include?(opts[:interval_type])
    raise ArgumentError.new('interval_type must be either :fixed_delay or :fixed_rate')
  end
  if opts[:timeout] || opts[:timeout_interval]
    warn 'TimeTask timeouts are now ignored as these were not able to be implemented correctly'
  end

  @run_now = opts[:now] || opts[:run_now]
  @interval_type = opts[:interval_type] || DEFAULT_INTERVAL_TYPE
  @task = Concurrent::SafeTaskExecutor.new(task)
  @executor = opts[:executor] || Concurrent.global_io_executor
  @running = Concurrent::AtomicBoolean.new(false)
  @value = nil

  self.observers = Collection::CopyOnNotifyObserverSet.new
end
ns_kill_execution() click to toggle source

@!visibility private

# File lib/concurrent-ruby/concurrent/timer_task.rb, line 324
def ns_kill_execution
  @running.make_false
  super
end
ns_shutdown_execution() click to toggle source

@!visibility private

# File lib/concurrent-ruby/concurrent/timer_task.rb, line 318
def ns_shutdown_execution
  @running.make_false
  super
end
schedule_next_task(interval = execution_interval) click to toggle source

@!visibility private

# File lib/concurrent-ruby/concurrent/timer_task.rb, line 330
def schedule_next_task(interval = execution_interval)
  ScheduledTask.execute(interval, executor: @executor, args: [Concurrent::Event.new], &method(:execute_task))
  nil
end